What We Buy

Clean, dry aluminum beverage containers, preferably delivered in large plastic bags with no other debris or contamination. Cans are not required to be crushed, but this does help remove liquids. There is no increased value to the tabs removed from Aluminum Cans.

Cans delivered in anything but large plastic bags may be purchased at reduced pricing. This includes grocery store bags, or the use of bags within bags.

Clean aluminum foil, pie plates, or other single use aluminum cooking products. Must be free of food debris.

Materials consisting of at least 50% aluminum weight, with the remainder composed of steel. Some plastic contamination is allowable.

Materials consisting of at least 80% aluminum weight, with the remainder composed of steel or other contamination, including other non-ferrous metals.

Sheets of aluminum, such as siding, tubing, or gutters, that are free of all contamination such as caulk or screws.

Sheet aluminum with less than 10% contamination from steel, such as screws or nails.

Various unsorted grades of aluminum may be purchased together as Mixed Aluminum. As there is different pricing for each grade of aluminum, an on-site evaluation will determine the value of these mixed loads.

Clean 6063 aluminum that was manufactured through an extruding process. Includes window and door frames that were not installed and therefore have no nails, screws, caulk or glue. Absolutely no contamination is allowed in this grade.

Raw, unpainted Aluminum Extrusions, free of any contamination.

Aluminum extrusion, such as window or door frames, that may contain a small amount of contamination from nails, screws, caulk or glue, not to exceed 5% contamination by weight.

Clean 6061 aluminum plates or extrusions that are at least 1/4" thick. Must be raw, unpainted, and free of any contamination.

Clean molded aluminum. Includes clean BBQ hoods, cookware, and automotive parts. Must be free of all contamination.

Cast Aluminum that may contain up to 10% contamination from steel.

Clean molded aluminum containing a higher percentage of zinc than traditional Cast. Includes some auto parts, faucet fixtures, lamp fixtures, and ceiling fan parts. Die Cast is commonly found in decorative items. Must be free of any contamination.

Insulated aluminum wire (Neoprene) and bare, stranded aluminum wire with a steel wire in the center (ACSR). These two materials do not need to be separated and can be sold together.

Clean, stripped, aluminum wire that is free from any plastic, rubber, steel, or other contamination. No ACSR wire is acceptable.

Clean, unplated aluminum wheels that are free of all steel lug inserts, clip on or stick on wheel weights, valve stems, tires, plastic covers, and other contamination.

Chrome plated aluminum wheels that are free of all steel lug inserts, clip on or stick on wheel weights, valve stems, tires, and other contamination.

Aluminum wheels that may contain steel lug inserts, clip on or stick on wheel weights, and valve stems. Tires are not permitted.

Chrome plated aluminum wheels that may contain steel lug inserts, clip on or stick on wheel weights, and valve stems. Tires are not permitted.

Aluminum wheels, chrome plated or not, with a complete or partial tire still attached.

Heavy structural aluminum tube used to reinforce automotive bumpers. Pricing may vary dependent on non-aluminum contamination.

Aluminum automotive transmissions without torque converter. Excess steel must be removed, and all fluid must be drained.

Also known as "aluminum shavings." A byproduct of machine cutting aluminum, must be free of excess oil or cutting fluid, steel or other metals, and contaminants such as plastic or trash.

Aluminum Turnings with a tolerance for a small percentage of contamination.

Sheet aluminum used for building siding that has been factory painted. Must be free of nails, screws, caulk, glue, or any other contamination.

Aluminum/composite bonded commercial building material that consists of 2 sheets of aluminum surrounding a fire-retardant core. Must be free from any contamination, however the factory protective film is acceptable.